How to Use the Magic Hooper Embroidery Hooping Station (All Models):
1- Mark the center of the embroidery on the sample garment.
2- Locate the center of the logo to be embroidered, and place the central positioning marker at that location.
3- Center the embroidery hoop base on the central positioning marker.
4- Select the brackets that best fit the shape of the hoop and place them in position.
5- Secure the backing in place by placing the elastic bands in the correct position.
6- Once the station has been prepared, you can place the garment to be embroidered in the station and attach the top of the hoop.
Using the 5" Hooping Station Arm (Specific to the LG Station):
To create a firm 5" Station Arm from the two 2.5" extensions, follow these steps:
Use the included metal plate to join the two extensions.
Attach the metal plate to the underside of the extensions, on the inside of the station.
This will ensure a secure configuration that does not interfere with the use of the Embroidery Station.
Use the brackets that best fit the shape to hold the embroidery hoops.
To use the Station Arm, place the knurled nut as shown in this photo.
Station Arm configuration for sleeves, cap backs, socks, etc.
Station Arm configuration for bags, towels, belts, etc.
The Hooping Station easily attaches to most tables using C-clamps (not included in the box)